TQ 2S balance/charge adapter designed for 2S Li-Poly hard packs that use 4mm bullets for power and a 2mm bullets for balance. The 7” (180mm) adapter is constructed using 13 gauge wire with bullet connectors for the battery and a female ultra plug to attach to your charge lead. The XH balance connector is plugged into your balancer interface directly or you can use our trick XH Balance Extension Cable (#2201) to give you more room.
 |
#2500 | 180mm | 2S balance/charge adapter | $6.95 |
|
 |
#2600 | 180mm | 2S balance/charge adapter solid bullets | $8.95 |
|
TQ 4mm Low Profile Male Bullet pair of low profile, 4mm bullet male connectors.
The connectors are available in 2 sizes: 18mm and 14mm overall lengths.
The 14mm version will not rise above the pack and interfere with the body in 12th scale cars.
These bullets have been redesigned for a better fit in packs that have smaller than usual terminal ports.
Now available in low resistance silver plate.
 |
#2501 |
18mm length |
4mm Low Profile Male Bullet - 2 pcs | $3.50 |
|
 |
#2502 |
14mm length |
4mm Low Profile Male Bullet - 2 pcs | $3.50 | |
 |
#2503 |
18mm length |
4mm Low Profile Male Bullet - 2 pcs SILVER | $3.75 | |
 |
#2504 |
14mm length |
4mm Low Profile Male Bullet - 2 pcs SILVER | $3.75 |
TQ 2S Balance extension cables use our flexible triple black 22 gauge cable material to relocate the balance plugs closer to you, making it easier to balance the pack in your car. The cables have either XH connectors (SMC, Orion type) or ThunderPower style plugs on both ends. These are now 450mm in length and plug into the balance board supplied with your charger.
 |
#2201 | 450mm | TP 2S Balance Extension Cable | $5.95 |
|
 |
#2202 | 450mm | XH 2S Balance Extension Cable | $5.95 |
|
TQ 2S Balance *charger specific* multi-extension cables use our flexible triple black 22 gauge cable material to relocate the balance plugs closer to you, making it easier to balance the pack in your car. These cables are made to plug directly into the balance port of your charger. One end has your charger specific plug and the other end has both - XH connectors (SMC, Orion type) and ThunderPower connector. These are 450mm in length and plug directly into the charger and eliminate the balance board.
When using the #2204 Hyperion/Hitec X4 balance extension with the new Hyperion HP-EOS0720i SUPER DUO3 charger you need to align the cable's plug with the right side of the charger port.
When using the #2203 TP balance extension cable on the new TP820CD make sure the connector on the cable is shifted to the left side of the charger's balance port. The cable was designed to fit the TP610C that has a shorter port.
 |
#2203 | 450mm | ThunderPower Balance Extension Cable | $6.95 |
|
 |
#2204 | 450mm | Hyperion/Hitec X4 Balance Extension Cable | $6.95 |